#Dell r815 idrac enterprise license cost how to
#Dell r815 idrac enterprise license cost install

#Dell r815 idrac enterprise license cost install

Install Mezzanine card slot C that supports Fabric C.

This card must match the fabric type of I/O modules B1 and B2 of the M1000e.

Install Mezzanine card slot B that supports Fabric B.

Remove any PCIe Mezzanine cards installed in Fabric B and Fabric C slots of the server module.

To configure a Mxxx (for PE VRTX) server module for the M1000e enclosure from the VRTX enclosure:

The supported server module types are designated as Mxxx.įollow this procedure to install server modules that are not configured for the M1000e enclosure: Note: If you install server modules that are not configured for the M1000e enclosure, an error message is displayed. The M1000e enclosure includes up to 16 half-height server modules, eight full-height server modules, eight sleeves with quarter-height server modules, or a mix of the three server module types. The PowerEdge M1000e was introduced during the 10th Generation range.

MXG610s has an appended s for IO Module.

MX5016s has an appended s for Storage sled.

MX740c or MX840c has an appended c for Compute sled.

The supported storage module sleds are designated as MXxxxxsįor MX7000 modular: compute sleds, storage sled and IO modules are identified with an additional letter appended to the end of the model name. The supported server module sleds are designated as MXxxxc. The MX7000 enclosure has eight front-accessible slots for 2-socket single-width or 4-socket double-width compute sleds and single-width storage sled combinations.

The PowerEdge MX7000 was introduced during the 14th Generation range. So, for example, the 2950 model is a 2U system from the 9th generation of servers in Rack format in an independent box. Fourth digit – Indicated whether blade or independent box (5 for blade, 0 for normal independent box).Third digit – Server type (5 for rack server, 0 for tower server).Second digit – Generation of server (up to 9th generation).MX9116n has an appended n for IO Moduleīefore the 10th generation of PowerEdge servers, the Naming convention used 4 digits (ex: PowerEdge 2950) where the digits represent:.MX740c or MX840c has an appended c for Compute.* For MX7000 modular enclosure: compute sleds, storage sled and IO modules are identified with an additional letter appended to the end of the model name. So, for example, the R6415 model is a Rack 1 CPU socket system from the 14th generation of servers with AMD Processors. – The fourth number indicates the make of the CPU, 0 for Intel and 5 for AMD. – The third number indicates the number of CPUs, 1 for 1 CPU and 2 for 2 CPU’s. With 1-5 defaulting to iDRAC Basic and 6 – 9 defaulting to iDRAC Express. – The first number after the letter indicates the class of the system. So, for example, the R710 model is a Rack 2 CPU system from the 11th generation of servers with Intel Processors. – The third number indicates the make of the CPU, 0 for Intel and 5 for AMD. – The second number indicates the generation, with 0 for 10th generation, 1 for 11th generation and so on. With 1-3 being 1 CPU systems, 4 – 7 are 2 CPU systems, 8 can be 2 or 4 CPU’s and 9 is 4 CPU’s. M or MX* = Modular – Blade servers and other items for the modulal enclosure MX7000, M1000e and/or VRTX.F = Flexible – Hybrid rack-based sleds for rack-based FX2/FX2s enclosure.C = Cloud – Modular server nodes for hyper-scale environments.The letter indicates the type (form factor) of the server: Starting with the 10th Generation of PowerEdge servers, the naming for the server models generally consist of a letter(s) followed by three or four numbers (ex: PowerEdge R710 or PowerEdge R6415 or MX740c).

#Dell r815 idrac enterprise license cost how to

Here we will explain how to identify which generation of a server you have. You might have come across Dell PowerEdge servers being referred to by their generation to cover a range of models.įor example 11G, 12G, 13G, or 14G (14th generation).